Dynamic Plasticity and Fracture in High Density Polycrystals: Constitutive Modeling and Numerical Simulation

Report No. ARL-RP-151
Authors: J. D. Clayton
Date/Pages: September 2006; 48 pages
Abstract: Presented is a constitutive framework for modeling the dynamic response of polycrystalline microstructures, posed in a thermodynamically consistent manner and accounting for finite deformation, strain rate dependence of flow stress, thermal softening, thermal expansion, heat conduction, and thermoelastic coupling. Assumptions of linear and square-root dependencies, respectively, of the stored energy and flow stresses upon the total dislocation density enable calculation of the time-dependent fraction of plastic work converted to heat energy. Fracture at grain boundary interfaces is represented explicitly by cohesive zone models. Dynamic finite element simulations demonstrate the influences of interfacial separation, random crystallographic orientation, and grain morphology on the high-rate tensile response of a realistic two-phase material system consisting of comparatively brittle pure tungsten (W) grains embedded in a more ductile matrix of tungsten?nickel iron (W?Ni?Fe) alloy. Aspects associated with constitutive modeling of damage and failure in the homogenized material system are discussed in light of the computational results.
Distribution: Approved for public release
  Download Report ( 1.265 MBytes )
If you are visually impaired or need a physical copy of this report, please visit and contact DTIC.
 

Last Update / Reviewed: September 1, 2006