Monolithic Microwave Integrated Circuit (MMIC) Frequency Doublers—2nd Pass Correction

Report No. ARL-TN-0580
Authors: John E. Penn
Date/Pages: September 2013; 16 pages
Abstract: Frequency multiplier microwave monolithic integrated circuits (MMICs) can be used for a variety of radio frequency (RF) and microwave systems. Several frequency doublers were designed using a 0.13-μm gallium arsenide (GaAs) pseudomorphic high electron mobility transistor (PHEMT) process from TriQuint Semiconductor. The original design and fabrication of these circuits was performed as part of the fall 2011 Johns Hopkins University (JHU) MMIC Design Course, taught by the author. As noted in the previous technical note, ARL-TN-0517, Monolithic Microwave Integrated Circuit (MMIC) Frequency Doublers, the measured results for the open circuit stub to attenuate the fundamental harmonic indicated that an electromagnetic (EM) simulator, such as Sonnet EM, more accurately modeled the performance compared to a standard microwave linear simulator. The length of the stub attenuators were corrected and refabricated as part of the fall 2012 JHU MMIC Design Course. The measurements of the second pass 8- and 16-GHz frequency doublers with harmonic stubs are documented in this follow up technical note.
Distribution: Approved for public release
  Download Report ( 0.529 MBytes )
If you are visually impaired or need a physical copy of this report, please visit and contact DTIC.
 

Last Update / Reviewed: September 1, 2013