Characterization of Cyclohexanone Inclusions in Class 1 RDX

Report No. ARL-TR-6962
Authors: Rose A. Pesce-Rodriguez and Stephanie M. Piraino
Date/Pages: June 2014; 30 pages
Abstract: Neat Class 1 RDX and Class 1 RDX from prills and pressed Comp A-3 (type II) have been characterized with respect to solvent inclusions in support of a U.S. Army Research Laboratory (ARL) program to model Multiscale Response of Energetic Materials (MREM). It was observed that even "dry" RDX retains surface-adsorbed solvent and the level of this adsorbed solvent can be reduced, but not eliminated, by heating at 50 °C under vacuum. Such treatment does not remove included solvent unless the temperature is high enough to cause the included solvent to expand sufficiently to result in micro-cracks. Desorption gas chromatography (GC)-mass spectrometry (MS) was used to quickly estimate both the average volume and weight percent of RDX solvent inclusions. Included solvent in Class 1 RDX accounts for less than 0.04% of total mass, whereas adsorbed solvent accounts for about half that. The average inclusion size for Class 1 RDX was estimated to be ~1 µm. Pressing Comp A-3 prills into charges results in particle size reduction and loss of solvent inclusions. It is proposed that solvent liberated from inclusions can aid in binder-filler interaction in the pressed sample by solvating material at interfaces and, perhaps, by smoothing sharp edges resulting from cracked particles.
Distribution: Approved for public release
  Download Report ( 0.844 MBytes )
If you are visually impaired or need a physical copy of this report, please visit and contact DTIC.
 

Last Update / Reviewed: June 1, 2014