Spectrum Monitoring Using SpectrumAnalysis LabVIEW Software, Nanoceptors, and Various Digitizing Solutions

Report No. ARL-TR-7217
Authors: Joshua Smith
Date/Pages: February 2015; 26 pages
Abstract: High-speed spectrum sensing is a key component in numerous radar applications and can be accomplished by using modern digitizers paired with radios. This effort uses a gallium-germanium (GaGe) 16-bit, 200-MS/s Peripheral Component Interconnect Express (PCIe) digitizer for spectrum sensing. The digitizer rapidly captures 40-MHz-wide snapshots of the spectrum, which are first filtered and down-converted by a SI-8614 Nanoceptor" receiver and then processed using LabVIEW virtual instruments (VIs), optimized to achieve near-continuous capture rates and less hardware intensive real-time monitoring. For optimal capture rates, I use a LabVIEW producer-consumer loop; the producer loop quickly adds data to a queue (captured from the digitizer) and the consumer loop pulls data off the queue to process it at an often slower pace (using CUDA to perform multi-channel fast Fourier transform [FFT] computations). Apart from wideband spectrum sensing, this hardware configuration is also useful for detecting nonlinear targets. A higher resolution digitizer, the NI PXI-5922, is integrated and used to measure harmonics as low as –130 dBm while maintaining the ability to capture higher power fundamental signals. The use of 24-bit high fidelity audio cards is investigated for viability as a low-cost, high resolution digitizing solution for similar narrowband applications.
Distribution: Approved for public release
  Download Report ( 0.622 MBytes )
If you are visually impaired or need a physical copy of this report, please visit and contact DTIC.
 

Last Update / Reviewed: February 1, 2015