Development of Rolling Schedules for Equal Channel Angular Extrusion (ECAE)�Processed AZ31 Magnesium Alloy Sheet

Report No. ARL-TR-7644
Authors: Laszlo J Kecskes; Vincent H Hammond; Michael Eichhorst; Norman Herzig; Lothar Meyer
Date/Pages: April 2016; 46 pages
Abstract: Rolling procedures for equal channel angular extrusion (ECAE)–processed AZ31 magnesium plates have been developed. Using a temperature of 300 ℃ and a 10% reduction per rolling pass, the initially 9-mm-thick plates were successfully reduced into 1.5-mm-thick sheets. Two sets of plates, each with a different texture type, were evaluated. Microscopic examination of the rolled sheet material shows a highly heterogeneous substructure, consisting of 2 types of precipitate colonies dispersed in a refined grain size (~10 μm) magnesium alloy matrix. Furthermore, the as-rolled microstructure is banded, containing alternating layers of coarser and finer grains. These regions are separated by a network of shear bands. Mechanical testing results show a relatively high strength and high ductility. However, the ability to fabricate sheet material from the ECAE plates strongly depends on their initial texture. Moreover, texture A produces greater asymmetry in the measured ductility along the longitudinal and transverse directions, respectively, than does texture C.
Distribution: Approved for public release
  Download Report ( 5.477 MBytes )
If you are visually impaired or need a physical copy of this report, please visit and contact DTIC.
 

Last Update / Reviewed: April 1, 2016